|
DMX-512
to 24 channel analogue Demultiplexer
|
|
The
DMX-512 to analogue Demultiplexer interfaces a standard DMX-512
data stream to 24 analogue output channels. The 24 analogue channels
are simultaneously updated, so the actual voltage levels at the outputs
corresponds to the data actually contained within the same DMX-512
transaction.
The
output level can be varied within a +/- 20% range with respect to the 10V
reference. All digital in- and outputs are galvanically
decoupled from the analogue section. All channels are referred to a common GND
potential and deliver a positive output voltage. |
 |
|
|
DMX-512
base address selection is easily done via three decimal coded onboard DIP
switches. Optional
display
and keyboard units are fully soft- and hardware compatible with the SlideView
or DMX-512 recorder products version 2.00 and above. So direct
replacement is easily done and at no extra costs. In
case of needing an negative output voltage or both negative and positive output simultaneous
just add the voltage mirror output configuration to your analogue
Demultiplexer.
|
|
|
|
|
DMX-512
to Analogue Demultiplexer - manual (English version) ... |
|
|
|
DMX-512
Demultiplexer firmware (current version
1.01) ... |
|
|
|
Octal
DMX-512 signal repeater (also
quad and hex version)
|
|
The
DMX-512 signal repeater delivers up to eight galvanically decoupled
output lines. The output is galvanically decoupled from the input line as
well as from each other output line. Each input and output line features enhanced
ESD and EMI protection circuitry to withstand up to 250Vdc differential mode
transients and a minimum
common mode transient immunity of up to 1500Vdc. Typical
propagation delay from input to output is 200ns.
|
 |
|
|
All
eight output channels
are simultaneously updated, so the actual data at the output lines
corresponds to the data currently contained within the same DMX-512
transaction. Further details coming soon ...
|
|
|
|
|
Octal
DMX-512 signal repeater - manual (English version) ... |
|
|
|
100
Vector DMX-512 Recorder
|
|
The
DMX-512 recorder is designed as stand alone or backup system with the
capability of recording and playing back 100 different DMX-512 vectors. The
onboard
RS-232 interface enables you to up- and download your DMX-512 data from a PC
System. For the appropriate Win32™ application check our Software
section. The
DMX-512 Recorder comes with an enhanced DMX-512 in- and output with improved
fail save termination. Other features include reduced EMI and
susceptibility to reflections, standard wired XLR-5 connectors and fail-safe
detection of open DMX-512 lines. DMX-512 in- and output lines can be
galvanically insulated to provide signal repeater functionality.
The complete DMX-512 subsystem is galvanically decoupled from the recorder system.
Internal
DMX-512 stacks are simultaneously updated, so the actual DMX-512 data vector
corresponds to the data information contained within the same DMX-512
transaction. |
|
|
|
Remote
control of the system is done via RS-232,
attached keyboard (including a LCD Display) or a
parallel interface (PLC interface). In need
of other interface options please contact us
directly. Display
and keyboard units are fully soft- and hardware compatible with the SlideView
or PCS Shutter products version 2.00 and above. So direct
replacement is easily achieved and at no extra costs.
USB
interface coming soon ....
|
|
|
|
|
DMX-512
Recorder - manual (German version) ... |
|
|
|
Optional
PLC interface - manual (German version) ... |
|
|
|
DMX-512
Recorder firmware (current version 1.00) ... |
|
|
|
|
Download
the latest version of Adobe Acrobat Reader™ (current V5.0) |
|
|
|
|
|
|
|
