|
PCS Shutter
(Classical and
Enhanced version)
|
|
The
new PCS Shutter assembly is build around a 5phase intelligent
MicroStepper™ to improve shutter movement.
For extremely slow travel (2 to 5 minutes
per 250mm) the driver runs on a micro step
rate of 64 micro steps per full step. For
fast travels (800ms for the same distance)
micro stepping is completely omitted to
improve the shutter dynamic. The intelligent
Microstepper is connected via an I2C™
interface to the motherboard.
The
system can be interfaced to analog remote
control systems via a +/- 10V input and four
10V outputs. For further interface option
check the product documentation within the
online manual section.
|
|
|
|
The
new PCS Shutter comes with an enhanced RS-485 (DMX-512 in-
and output) interface with improved
fail save termination. Other features include reduced EMI and
susceptibility to reflections, standard
wired XLR-5
connectors and fail-safe
detection of open looped lines. Display
and Keyboard units are fully soft- and hardware compatible with the SlideView
or DMX-512 recorder products version 2.00 and above. So direct
replacement is easily done and at no extra costs.
Display
and Keyboard units are fully soft- and hardware compatible with the SlideView
or DMX-512 recorder products version 2.00 and above. So direct
replacement is easily done and at no extra costs.
|
|
|
|
|
PCS
Shutter - manual (English version) ... |
|
|
|
PCS
Shutter Initialization sensor upgrade |
|
|
|
PCS
Shutter firmware (current version 1.74) |
|
|
|
Auto
Level (auto leveling system)
|
|
AutoLevel
is an fully automated system for industrial level control. The
new AutoLevel assembly is build around a 2phase intelligent
MicroStepper™ to improve cartridge movement. For extremely slow travel (2 to 5
minutes per 300mm) the driver runs on a micro step rate of 128 micro steps per
full step. For fast travels micro stepping is completely omitted to improve the
cartridge dynamic. The intelligent Microstepper is connected via an I2C™
interface to the motherboard.
External
optical sensors guarantee an wear free operation of the complete system and
ensure a minimum of maintenance for daily operation.
|
|
|
|
Optional
display
and keyboard units are fully soft- and hardware compatible with the SlideView
or DMX-512 recorder products version 2.00 and above. So direct
replacement is easily done and at no extra costs.
|
|
|
|
|
AutoLevel
firmware (current version 1.20) ... |
|
|
|
Slide
Changer (belt
driven Carousel)
|
|
SlideChanger
is an fully automated slide handling system for stage projection. The
new SlideChanger (V 2.00) assembly is build around a 2phase
intelligent MicroStepper™ to improve cartridge movement. For extremely slow
travel (2 to 5 minutes per 280mm) the driver runs on a micro step rate of 128
micro steps per full step. For fast travels micro stepping is completely omitted
to improve the cartridge dynamic. The intelligent Microstepper is connected via
an I2C™ interface to the motherboard. The
system can be interfaced to analog remote control systems via two +10V inputs
and two 10V outputs (the analogue inputs are also compatible for PLC
control). For further interface option check the product documentation within
the online manual section.
|
|
|
|
The
new SlideChanger comes with an enhanced RS-485 (DMX-512 in-
and output) interface with improved
fail save termination. Other features include reduced EMI and
susceptibility to reflections, standard wired XLR-5 connectors and fail-safe
detection of open looped lines.
Optional
display
and keyboard units are fully soft- and hardware compatible with the PCS
Shutter or DMX-512 recorder products version 2.00 and above. So direct
replacement is easily achieved and at no extra costs.
|
|
|
|
|
Slide
Changer - manual (English version) ... |
|
|
|
|
Dia
Wechsler Handbuch (deutsche Version) ... |
|
|
|
|
SlideView
firmware (current version 2.70) ... |
|
|
|
|
Download
the latest version of Adobe Acrobat Reader™ (current V5.0) |
|
|
|
|
|
|
|
